On this page you will find what we think are the finest additions available for the Land Rover Defender 90 and Discovery.

If you have a need for a product and don't see it here, please call as we are more than happy to help you create a particular one-off part you just have to have.

The Rock Ware RockRR The Rock Ware RockRR is a Range Rover or Discovery based 4 seater rock buggy. The RockRR offers our customers a capable off road buggy at a cost far less than your traditional custom built rock chassis, without sacrificing capability. The RockRR has a number of options! Click Here for more Details Rock Ware RockRR Bare Chassis $2800 RockRR Chassis with tabs and mounts $3995

Do you want to add some longer legs to your D-90? Well what if we told you that we can fit Ranchos longest 9000 series shocks, increase rear axle droop at least six inches over stock, retain the ride you're accustomed to and do it for around $500? (shocks and springs not included)

We have a rear shock mount available to you that will get every millimeter of travel out of a Rancho 9012 shock if used in conjunction with our spring retainers. The shock mount is a work of art built from .120 wall 1" tubing and mounts in the factory location, this set up also includes a lower mount adapter to allow use of the eyelet to eyelet shock. This system is complete and does not require brake line or bump stop modifications. D90 Shock Mounts $225 pair

D-90 Spring Retainers $75 pair

D-90 Trailing Links $160 pair, with core exchange

Disco and Range Rover Suspension Kit

We now have our popular suspension system available for Discos and Range Rovers. This suspension system will add some serious trail performance to your grocery getter.

Disco/Range Rover Shock Mounts $195 pair

Disco/Range Rover Spring Retainers $75 pair

Disco/Range Rover Trailing Links $160 pair

D-90 Front Bumper

D-90 winch bumper	D-90 front bumper with 2" receiver	(Custom built winch bumper)

Finally a bumper available for the D-90 that is as rugged as the rest of the vehicle. No wimpy plates of steel welded together. Comes standard with a winch tray; light mounts, additional tow points and limb raiser tabs are available at your request. You must know which winch model you are using when ordering. This is simply the best unit of its kind, with more strength and better approach angles than the competition. The Bottom of our bumper is about the center of the factory unit.

D-90 Front Bumper with Winch Mount $850

D-90 Rear Bumper with Tire Carrier Starting at $1500
call for details and options

Rock Ware Diff Guards are designed to protect your axles and stand up to all the abuse our customers can dish out.

Rover Diff Guard $85 each

D-90, Range Rover and Discovery Rock Sliders

Rock Ware Rock Sliders are built to take the rugged use of our customers. They will not flex or bend under the big hits and will offer you the kind of protection you have been looking for. They are made from rectangular boxed steel finished in black.

D-90 Rock Sliders $425

Disco and Range Rover Rock Sliders $525

One of our most sought after accessories, the Frame Slider, protects the delicate frame of your Rover. The Frame Slider is made of 3/16" steel and will handle all the abuse you can throw at it. It encapsulates the frame from front radius arm to rear trailing link bracket and more. The design allows the slider to extend past the rear trailing link bracket to provide a smooth transition at this pesky hang up point. All with a single bolt (existing) for attachment. Just think ... no more having to beat your frame back into shape with a hammer, you will not damage your frame with these installed. D-90 and Disco frame sliders $300

We also have a LARGE skid plate available that tucks almost up into the engine compartment and adds protection to the catalytic converters, made from 1/4" steel and braced. Comes with vent holes to keep floor temperatures down. D-90 skid plate shown. D-90 and Disco catalytic converter skid plate $340

Ever manage to almost clear an obstacle only to get your progress halted by the lowest point on your rig? We've all been there, why not install a Rock Ware Pinion Guard, and slide over those last few inches instead of getting hung up? The pinion guard is made of 1/4" steel and is easily installed in about ten minutes, it provides a smooth surface from the u-joint flange to the rear of the third member. Protects the pinion u-joint from any direct blows, available for D-90, Disco, and Ranger Rover Classic. Rear Pinion Guard $60 Front Pinion Guard with Tie Rod Guide $85 Disco Pinion Guard (Flex Joint) $70

One of our latest additions to the product line is this beefy 1/4" aluminum fuel tank skid plate. This skid plate fits Discos and most Range Rovers. Easy to install to factory mount points. Discovery and Range Rover Fuel Tank Skid Plate $325

HD Steering

We are also doing some strength modifications on the front of the Rovers, namely in the steering department. We can supply a much stronger drag link and tie rod by sleeving the o.e.m. part with 1 1/4" D.O.M. tubing. All tie rod and drag link services are for direct shipment without exchange.

D-90 or Disco Drag Link $85

D-90 or Disco Tie Rod $90

Disco Tie Rod with Stabilizer Mount $105

D-90 or Disco Tie Rod $170

Disco Steering Stabilizer Relocation Kit $105

All of our products will be finished in two coats of semi-gloss Rustolium Paint unless otherwise specified. Powder coating or Zinc plating is available at additional cost.

Our products are designed to be used for Off Road only and their use beyond that is at the owners own risk. Rock Ware warrants its products to be free of defects for one 1 year from the date of delivery for materials and workmanship. Rock Ware will repair or replace the defective part only at our discretion. Paint and finish is not covered unless the an optional upgraded finish is purchased. We at Rock Ware are committed to providing the best products and customer service that we possibly can! Please let us know how we can serve you!